1.Features
SC2.0/SC3.0/FC2.0/FC3.0 All machines are universal
2.Machine debugging
The wearing machine sends the material into the track through the vibrating plate
to form the sequence, thus meeting the threading requirements. The following
points are included in the debugging:
1. After the main switch is powered, each vibrating plate controls the speed by
adjusting the voltage, and each code in the power box corresponds to the
vibrating plate identifier;
2. The position of the vibrating plate guide rail and the track, the track and the
track should be suitable, the channel should be smooth, the interval is too large,
it is easy to cause the material or abnormal noise, too small will also produce
friction, the height should be moderate, can pass three Positioning column
adjustment;
3. The continuity of materials should be maintained during the operation of each
vibrating plate to avoid jamming. If there is material, it needs to be taken out in
time, or the material can be taken out at the end of the track;
4. The spring vibrating plate air pressure can be adjusted, the air pressure will
blow, and the weak will affect the pop-up;
5. 2.0 and 3.0 production switching, 2.0 and 3.0 have their own internal and external
modules, which are installed in order from inside to outside during production;
6. Automatic discharge port, used for quick discharge when 2.0/3.0 material
switching, quickly exchange materials.
7. Counter, showing total output and batch output, and can make precise
adjustment of spring, top material and shift time.